目前所处理的方式主要有两种，一种就是进行大量的浆液置换，但是这种方式比较耗时，海水浪费大量浆液和工艺水。而另外一种方式就是添加脱硫专用消泡剂，但这两种方式不管是哪一种都是消耗时间比较长，并且在整个处理的过程中，对于脱硫效率均难以达标。因为这个问题从处理方式来讲，还是有很大欠缺，而最佳的解决方案还是要从整个的运行调节和监控手段上进行预防。
At present, there are two main ways to deal with it. One is to replace a lot of slurry, but this way is time-consuming and wastes a lot of slurry and process water. The other way is to add special defoamer for desulfurization, but either of them takes a long time, and the desulfurization efficiency is difficult to reach the standard in the whole process. Because there are still many shortcomings in the way to deal with this problem, and the best solution is to prevent it from the whole means of operation regulation and monitoring.
也就说，既然处理效果并不是非常的理想，那么就只能在运行过程中避免这种现象的处理。在运行的过程中要避免锅炉点火启动阶段的飞灰和油污等物质过多地进入脱硫塔，保证锅炉在油枪撤出后的正常运行。其次就是对于液位监测需要改进，建议采用压式变送器和密度计组合测量的方式。
That is to say, since the treatment effect is not very ideal, it can only be avoided in the process of operation. In the process of operation, it is necessary to avoid the excessive entrance of fly ash and oil www.zhenkongfumoj.cnwww.biaozhiji.cn www.baojietangshan.cnwww.daxiaotou.com.cn www.yanglaoyuanl.cn www.diandongmenj.cnpollution into the desulfurization tower during the ignition and start-up stage of the boiler, so as to ensure the normal operation of the boiler after the withdrawal of the oil gun. Secondly, the liquid level monitoring needs to be improved. It is suggested that the combination of pressure transmitter and densitometer should be adopted.